Medical Oxygen Concentrator/Oxygen Concentrator Factory with PLC Control Alarm System

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: 1-100 cubic meters
• Certification: ISO9001
• Noise Level: Low
• Voltage: 380V
• Purity: 90-96%
• Oxygen Purity: 90~96%
• Noise: 70 (dB)
• Operational Principle: Molecular Sieve Pressure Swing Adsorption
• Drug and Equipment Approval Letter: Ji Xi Zhu Zun 20202080146
• Application: Hospitals, Nursing Homes, Gyms, etc
• Usage: Oxygen Production
• Performance: Energy Saving
• Extraction Gas Status: Oxygen
• Transport Package: Wooden Box
• Specification: 1-50 cubic meters
• Trademark: Lixin Zhexing
• Origin: Hengshui, Hebei
• HS Code: 8419601900
• Production Capacity: 200 Sets/Year

Product Description

The main structure of the product
This product mainly consists of an oxygen generator, an air storage tank, an oxygen storage tank, a flow meter, and other components, which are connected to each other through a gas pipe. The oxygen production host includes a chassis, an air compression system (air compressor, pressure sensor), a gas source purification system (refrigerated dryer, suction dryer, filter), a medical molecular sieve adsorption and separation system (adsorption tower, molecular sieve, electronic drain valve), a control system (PLC controller, contactor, touch screen), a monitoring and alarm system (oxygen analysis module), etc., which are connected through gas pipes and cables.
 

 

 Product features
1. Low energy consumption for oxygen production: Compared with similar domestic technologies, the energy consumption is lower, reaching 0.3-0.5KWH/Nm3.
2. High oxygen production: Oxygen production of 1-100 cubic meters, can be customized according to needs.
3. Easy to operate: The startup time is less than 30 minutes, the footprint is small, the maintenance cost is low, and the installation and civil engineering costs are low. Advanced process flow: high degree of automation, unmanned, remote monitoring, and high reliability for long-term operation. Oxygen purity reaches over 93% ± 3%, uninterrupted oxygen production, low noise, small footprint, convenient for computer room design, flexible installation, reducing the cost of using the computer room area, and easy maintenance. Make the output oxygen concentration more stable and quickly increase the oxygen concentration within 10 minutes. GPRS wireless monitoring, 24-hour uninterrupted monitoring of operating parameters.


Specifications, models, and technical parameters
 

NO.	Specification	OxygenVolume      (Nm³/h)	Oxygenpurity  %(V/V)	Outputpressure MPa	Ratedpower kW	Sickbeds
1	LXZY-1	1	≥90%(V/V)	0.3-0.8MPa    (adjustable)	≤5	≈20
2	LXZY-3.5	3.5			≤6.5	≈100
3	LXZY-5	5			≤10	≈150
4	LXZY-7.5	7.5			≤13	≈240
5	LXZY-10	10			≤16.5	≈300
6	LXZY-15	15			≤20	≈450
7	LXZY-20	20			≤28	≈600
8	LXZY-30	30			≤40	≈850
9	LXZY-40	40			≤58	≈1200
10	LXZY-50	50			≤78	≈1500
11	LXZY-60	60			≤98	≈1800
12	LXZY-80	80			≤120	≈2300
13	LXZY-100	100			≤145	≈3000
Remarks: 1. The working environment temperature of this device is 5-40 ºC. 2. Applicable beds are provided for reference only. If there are any changes to the data, the actual data provided shall prevail. 3. The installation environment and site are indoor explosion-proof areas, with an ambient temperature of ≤ 45 ºC and good ventilation conditions. 4. System installation power supply conditions: 220/380V, 50HZ, when the oxygen pressure requirement is higher than 0.5MPa, it can be pressurized to the user's desired pressure. 5. The installed power in the table refers to the total power of the entire machine, with additional required power. 6. The operating noise of the system can be maintained at about 85 points

Applicable scope

    The high-altitude integrated oxygen concentrator has a wide range of applications, and can be used in small and medium-sized hospitals, clinics, health stations, etc. in cities, rural areas, remote areas, mountainous areas, and other high-altitude areas. It is also suitable for other oxygen consuming places such as sanatoriums, sports training centers, oxygen bars, etc.

corporate performance 

                                  Weixian People's Hospital                                         Harrison International Peace Hospital
  

                             Ordos Mongolian Medical Hospital                     Phnom Penkhmon Provincial Hospital inCambodia
 

                  Hebei Provincial Ophthalmology Hospital                                      Xinle City Hospital

Factory Display  

Hebei Lixin Medical Engineering Co., Ltd. was established in 2011, mainly producing medical center gas supply systems, medical molecular sieve oxygen production equipment, medical negative pressure suction systems, medical compressed air systems, medical air cleaning equipment, as well as hospital operating rooms, ICU/CCUs, liquid dispensing centers, supply rooms, and laboratory purification engineering; Radiation protection engineering; Enterprises engaged in medical engineering.
The company adheres to the principle of "customer-centric, service-oriented" and has obtained 17 system certifications, including IS09001, 13485, 50430, 28001, 45001, and five-star after-sales service certifications, as well as 24 national patents and software copyrights.
We have established multiple branch offices in China, adhering to the fundamental principle of prioritizing public health, serving the people and winning their trust.

 

 

 Exhibition participation cases

 

Logistics transportation

FAQ:
Frequently asked questions:
1,Are you a manufacturer or a trading company?
We are a manufacturer of medical oxygen concentrators, established in 2011.
2,What are the main considerations when choosing an oxygen concentrator?
Check the flow rate: Medical oxygen concentrators have a Medical Device Registration Certificate, with a concentration of 90-96%.